Does your child have a habit of throwing his or her leaf bag in the bin in the house? Do you want to encourage that habit outside as well?
Did you know there is a solution available right now? You can actually make a leaf bag holder that your child can easily use throughout the day. It can help your child become more knowledgeable and responsible about recycling.
If you want to be able to talk to your children about how they can recycle better, this guide can help you out.
Read on to learn how to make a leaf bag holder that your children can use in your backyard.
Gathering the Materials
To make a leaf bag holder, you will need a few materials. These include a length of wood, a drill and drill bit, four screws, two hinges, and a sealant. The length of wood should be at least 24 inches long but can be up to 36 inches for a larger holder.
The drill bit should be appropriate for the type of wood being used. Four screws that will attach the hinges need to be large enough for the wood being used. Hinges should be made of a rust-resistant material, and the sealant can be any type of water-resistant sealant.
Once all the materials are gathered, an individual can begin making the leaf bag holder.
Fastening the Bottles Together
To make a leaf bag holder by fastening the bottles together, first, collect four empty plastic bottles of the same size. Rinse and remove labels if necessary. Fill each bottle halfway with sand or gravel and seal the caps tightly.
The bottles should still be able to move freely when placed on a flat surface. Take a sturdy piece of fabric and put all four bottles side to side in the center of the material. Tie the material around the bottles firmly and securely with string.
To make sure it’s secure, double-knot the bow. The bottles should be held together in a compact rectangular shape. Finally, turn the bottles so they are standing upright, and the fabric will hang down around them, forming a bag to place leaves or other debris in.
Creating the Base
When making a leaf bag holder and a contractor bag, it is important to create a sturdy base for it. Start by gathering two pieces of plywood that are 8 inches in length. Use a saw to cut these into two triangles.
Drill holes at each point of the triangle, ensuring they are big enough to fit the garden stakes through them. Place the two triangles one on top of the other and use screws to secure them together.
Once the triangles are securely placed together, use two garden stakes and place them through the holes created in the corners of the triangles. Hammer the stakes into the ground and shape. The base is now secure and ready for the next steps of the leaf bag holder process.
Measuring Out the Fabric
When making a leaf bag holder, measuring out the fabric is one of the most important steps that you need to take. It is important to measure out both the length and width to ensure that you have the correct amount of fabric to complete the project.
Begin by taking a tape measure and measuring the desired length and width of the material. When doing so, it is best to mark the measurements on the fabric with white chalk for visual reference.
Once the measurements are marked, cut the fabric to size. Make sure to make the cuts straight to create an even finish. For convenience, you can fold the fabric in half and cut the two sides out simultaneously to create the same length on either side.
Once the fabric is cut to size, you will be ready to begin the sewing process to make your leaf bag holder.
Sewing Up the Leaf Bag Holder
Making a leaf bag holder is a fun and creative way to repurpose plastic bags that would otherwise go to waste. To begin sewing the holder, use a sewing machine or needle and thread to connect two rectangles of fabric with right sides together.
Edge stitch along three sides of the fabric, making sure to leave an opening large enough to pass handles and the bottom of the plastic leaf bag through. Once the edges have been secured, turn the holder’s right side out and press with an iron.
Then stitch the open edge closed before attaching two more rectangles of fabric as handles on the top sides of the holder. You can now use the holder to gather fallen leaves and similar materials.
Finishing Touches for the Leaf Bag Holder
Once the frame for your leaf bag holder is ready, the finishing touches can be added. Start by attaching the plastic liner. Measure it against the width and depth of the frame to make sure its the perfect size.
Carefully attach the liner with staples or a heavy-duty stapler. Cut off any excess plastic so the liner fits beautifully in the frame. Next, sand down the frame using coarse grit sandpaper to give it a smooth finish.
Once the sanding is complete, paint the holder. For an extra touch, stencil the lettering or designs on the surface and finish with a clear varnish. Finally, attach the wheels to the underside of the frame to increase mobility.
When all is complete, your lawn bag holder is ready to be used to collect and store leaves!
Learn More About Leaf Bag Holder
Overall, every garden owner should invest in a leaf bag holder to make leaf collection much more manageable. Leaf bag holders can fit multiple sizes of bags, make it easier to stand and attach the bag, and reach double-sided trees.
Most of all, it saves time and energy. Investing in a leaf bag holder is a worthy investment that will make tidying up the garden easier.
If you want to explore the best topics, we’ve got you covered. Check out some of our other blogs today!
