The global e-bikes market was valued at $17.83 billion in 2021 and is expected to grow at a compound annual growth rate of 13.5% from 2022 to 2030.
Electric bikes are preferable to conventional bikes for a variety of reasons. These days, more people are starting to use any types of electric bikes.
Yet, there are some electric bike riding mistakes to know and to ensure that your riding goes off as smooth and as safe as possible.
Continue reading to learn about electric bike riding mistakes and how to avoid them.
1. Flat-Tired Riding
Riding on a flat tire is a typical error that may be dangerous. Check the electric bike tire pressure before you go on the bike and top it up to prevent this error. It’s also critical to check your tires in good condition.
The quickest way to spoil a biker’s day is a flat tire. Some riders pull their bikes to the location. Others never even notice a puncture.
The brakes, wheels, engine, and other parts sustain structural damage when riding on a flat tire. A flat tire poses a risk to the biker since it may pop off of the rim while riding. Make sure your tire is fully inflated before starting a ride.
If you intend to go on a long ride, you should also have a flat tire repair kit for your e-bike. These safety measures might save your life if trapped in the middle.
2. Changing Gears Too Quickly
An electric bike might be hard to ride up a mountain. It leads bikers to change gears without realizing the harm this does to the cycle. It can damage the motor and lead to the chain breaking.
Reduce the gears’ initial load to do this. Changing gears too rapidly when riding an electric bike is a typical error. It puts too much stress on the bike’s parts and might cause the user to have an abrupt and painful experience.
Gear shifting should be practiced slowly and smoothly. Be careful to speed up and decelerate gradually and smoothly to ease the shift.
3. Leaving the Battery Flat or Overcharged
The battery of the electric bike is its most crucial component. For enhanced performance and longevity, avoid charging the battery over time. Doing so causes a partial charge cycle, shortening the lifespan.
For safety purposes and the battery’s durability, always unplug the charger once the battery is full. You shouldn’t leave the battery drained for prolonged hours after a ride. Doing so can reduce battery efficiency over time.
Once the battery deteriorates, you’ll have no option other than an expensive replacement. So, for best results, you should charge your e-bike at least 70% after each ride.
4. Putting the Motorcycle in Turbo Mode
Always avoid starting the electric bike in turbo mode. Turbo mode expedites your ascent of the mountain but has drawbacks. Turbo mode depletes the charge. The bike would have to carry a heavier power load.
The correct procedure is to start the e-bike with minimal help and gradually increase it. It is a great way to experience outdoors, such as going for a Maui fun on electric bike excursions.
5. Not Cleaning the Electric Bike
Electric bikes become soiled. After a messy ride, leaving your electric bike unwashed can lead to dirt and grime buildup. It affects your bike’s essential parts, causing them to rust and disintegrate.
As a result, after each ride, you should clean your e-bike. Water or a moist towel and soap are enough to clean it. There is no one “correct method” to clean standard bicycles.
Electric bicycles, yet, are unique. Do not wash your electric bike upside down when cleaning it with water. A drain that allows water to pass through without hitting the engine is a common feature of e-bikes with mid-drive motors.
The motor can get soaked if this feature isn’t used. To avoid this, always wash your bike while standing and remember to remove the battery beforehand.
6. Failure to Maintain the Electric Bike
Many bikers get a little lazy with their electric bike’s maintenance. You must perform regular maintenance to keep your electric bike in top-notch condition. Plus, e-bike components are expensive; the last thing you’d want is to get them replaced many times.
Make sure to clean your bike at least once a week. The chain and motor should be free of any dirt and grime. On top of that, the moving parts should be lubricated every month.
Lastly, check the air in the tires before every ride for a smooth and safe ride experience.
7. Absence of a Bike Lock
Imagine leaving your e-bike someplace and finding it gone when you get back. Sounds awful, doesn’t it?
The theft of electric bikes happens frequently. E-bikes are much more likely to be stolen than traditional cycles. Your e-bike may be safeguarded against theft with a few preventative actions.
The most crucial is to get a reliable bike lock. Avoid cable locks because they can be cut too. Before leaving your bike at the location, make sure it is locked. Electric motorcycles are pricey, especially the most sophisticated versions. Yet, they do represent an investment.
Understanding Electric Bike Riding Mistakes and How to Avoid Them
Electric bike riding is a fun and convenient means of transportation, yet it is crucial to understand how to operate your bike. Knowing the electric bike riding mistakes and how to avoid them is to ensure the safety of you and those around you. Be confident in your knowledge of electric bike riding ranges, as it will provide a safe ride!
Be sure to also check your local regulations and laws before your next ride.
If you want to read more articles, visit our daily blog post.
