How to Distill Water? a Helpful Guide for Homeowners

Staying hydrated is essential to maintaining good health. It’s equally important to make sure that the water you drink is safe for consumption. 

When it’s hot outside during the summer, you likely go through extra water. This makes it challenging to keep enough distilled water on hand to meet your hydration needs. That’s why it’s important to learn how to make distilled water at home.

This article takes a look at how to distill water so that you’ll always have a fresh supply of potable water. Keep reading to get the inside scoop.

What You’ll Need

First, you’ll need a few supplies. These include a large pot. Ideally, this should be a 5-gallon pot with a lid. You’ll also need a glass bowl, a round baking rack, clean glass containers, and a heaping handful of ice cubes. 

Once you’ve gathered the necessary items, you’re ready to begin the process.

You can also buy supplies at Rockymountainwaterdistillers.com.

Using a Receiver Flask with Lid

The pot, which is also called a receiver flask, needs to be prepared for the distillation process. 

Fill the receiver flask halfway with water from the kitchen faucet. Now, place the glass bowl in the water. It’s important to keep in mind that the glass bowl will likely begin to sink as it fills with distilled water. Because of this, you might want to place the round baking rack for elevation.

Setting the Correct Temperature

Set the receiver flash on the stove and set the temperature to medium or high heat. Now you’ll need to wait until the water boils before moving on to the next step.

The boiling process will remove unwanted chemicals in the water such as ethanol and methanol.

Adding Ice

The amount of ice you need to use depends on how big your lid is. Keep in mind that you can always add more ice. The purpose of the ice is to cool the distillate in order to speed up and improve condensation inside the receiver flask.

You don’t have to use ice for this process, but it does help speed up the distillation process.

Condensation

When the water reaches a boil, turn the heat to low. Now flip the lid and place it upside down on the receiver flask and fill it with more ice cubes. This will help create condensation as hot steam rises to the cold lid.

Increasing the Heat

Now turn the beat back to high. As condensation increases, it will drip into your glass bowl. The goal is to fill the bowl as much as possible.

Removing the Pot

Let the bowl continue to fill, then remove the pot from the stove and set it aside to cool. Be sure to let it cool for a reasonable period of time before removing the bowl from the pot.

Removing and Storing the Distilled Water

Now pour the distilled water into your clean glass containers. Seal the containers with lids and place them in your refrigerator. Once the water cools completely, it will be ready to enjoy!

A Guide to How to Distill Water at Home

Most of us take clean drinking water for granted most of the time. Fortunately, this guide to how to distill water will ensure that you never have to go without.

Keep scrolling to discover more great tips and advice on your blog!

FreeSitesLike
Compare items
  • Job Sites (0)
  • Loans (0)
Compare
0